InSim Relay

From LFS Manual
Revision as of 13:42, 24 May 2022 by mbutcher (talk | contribs) (Escape code ^9 was incorrectly described as resetting the codepage when infact ^8 resets the codepage.)
Jump to navigationJump to search

InSim Relay usage information

The InSim Relay is a service that can connect to your LFS host via InSim and relay the InSim information sent by your host, to anyone who connects to the InSim Relay. This relayed data can be used by programmers for various things, such as the LFS Remote (remote viewing / adminning of a race) and race-tracking to store race information and statistics.

To have your host connected to the Relay, see this page on LFS World:

The rest of this document is only for programmers who want to know how to connect to the InSim Relay, so they can make use of the available data.

Source file information: InSim Relay source

Connecting to the InSim Relay

The Relay code below can be seen as an extension to the regular InSim protocol, as the packets are constructed in the same manner as regular InSim packets and use their own identifiers.

Connect your client to with TCP. After you are connected you can request a list of hosts, so you can see which hosts you can connect to. Then you can send a packet to the Relay to select a host. After that the Relay will send you all insim data from that host.

Some hosts require a spectator password in order to be selectable.

You do not need to specify a spectator password if you use a valid administrator password.

If you connect with an administrator password, you can send just about every regular InSim packet there is available in LFS, just like as if you were connected to the host directly. For a full list, see end of document.

Packet types used for the Relay

#define IRP_ARQ		250	// Send : request if we are host admin (after connecting to a host)
#define IRP_ARP		251	// Receive : replies if you are admin (after connecting to a host)
#define IRP_HLR		252	// Send : To request a hostlist
#define IRP_HOS		253	// Receive : Hostlist info
#define IRP_SEL		254	// Send : To select a host
#define IRP_ERR		255	// Receive : An error number

To request a hostlist from the Relay, send this packet :

struct IR_HLR // HostList Request
	byte	Size;		// 4
	byte	Type;		// IRP_HLR
	byte	ReqI;
	byte	Sp0;

That will return (multiple) packets containing hostnames and some information about them

The following struct is a sub packet of the IR_HOS packet

struct HInfo // Sub packet for IR_HOS. Contains host information
	char	HName[32];	// Name of the host
	char	Track[6];	// Short track name
	byte	Flags;		// Info flags about the host - see NOTE 1) below
	byte	NumConns;	// Number of people on the host

// NOTE 1)
#define HOS_SPECPASS		1	// Host requires a spectator password
#define HOS_LICENSED		2	// Bit is set if host is licensed
#define HOS_S1		        4	// Bit is set if host is S1
#define HOS_S2		        8	// Bit is set if host is S2
#define HOS_FIRST               64	// info:
#define HOS_LAST                128	// info:
struct IR_HOS // Hostlist (hosts connected to the Relay)
	byte	Size;		// 4 + NumHosts * 40
	byte	Type;		// IRP_HOS
	byte	ReqI;		// As given in IR_HLR
	byte	NumHosts;	// Number of hosts described in this packet

	HInfo	Info[6];	// Host info for every host in the Relay. 1 to 6 of these in a IR_HOS

To select a host in the Relay, send this packet :

struct IR_SEL // Relay select - packet to select a host, so relay starts sending you data.
	byte	Size;		// 68
	byte	Type;		// IRP_SEL
	byte	ReqI;		// If non-zero Relay will reply with an IS_VER packet
	byte	Zero;		// 0

	char	HName[32];	// Hostname to receive data from - may be colourcode stripped
	char	Admin[16];	// Admin password (to gain admin access to host)
	char	Spec[16];	// Spectator password (if host requires it)


To request if we are an admin send:

struct IR_ARQ // Admin Request
    byte    Size;		// 4
    byte    Type;		// IRP_ARQ
    byte    ReqI;
    byte    Sp0;

Relay will reply to admin status request :

struct IR_ARP // Admin Response
	 byte	Size;		// 4
	 byte	Type;		// IRP_ARP
	 byte	ReqI;
	 byte	Admin;		// 0- no admin; 1- admin

If you specify a wrong value, like invalid packet / hostname / adminpass / specpass, the Relay returns an error packet :

struct IR_ERR
	byte	Size;		// 4
	byte	Type;		// IRP_ERR
	byte	ReqI;		// As given in RL_SEL, otherwise 0
	byte	ErrNo;		// Error number - see NOTE 2) below

// NOTE 2) Error numbers :
#define IR_ERR_PACKET1          1    // Invalid packet sent by client (wrong structure / length)
#define IR_ERR_PACKET2          2    // Invalid packet sent by client (packet was not allowed to be forwarded to host)
#define IR_ERR_HOSTNAME         3    // Wrong hostname given by client
#define IR_ERR_ADMIN            4    // Wrong admin pass given by client
#define IR_ERR_SPEC             5    // Wrong spec pass given by client
#define IR_ERR_NOSPEC           6    // Spectator pass required, but none given

Regular insim packets that a relay client can send to host :

For anyone

Admin only

The relay will also accept, but not forward
TINY_NONE // for relay-connection maintenance

List of escape codes

^v - |
^a - *
^c - :
^d - \
^s - /
^q - ?
^t - "
^l - <
^r - >

^L = Latin 1 (CP1252)
^G = Greek (ISO-8859-7)
^C = Cyrillic (CP1251)
^J = Japanese (Shift-JIS)
^E = Central Europe (ISO-8859-2)
^T = Turkish (ISO-8859-9)
^B = Baltic (ISO-8859-13)
^H = Traditional Chinese (CP936)
^S = Simpified Chinese (CP949)
^K = Korean (CP950)

^0 - Black
^1 - Red
^2 - Light green
^3 - Yellow
^4 - Blue
^5 - Purple
^6 - Light blue
^7 - White
^8 - Dark green and reset codepage (default)
^9 - Dark green (keep current codepage)

Basic Setup Guide | Advanced Setup Guide | Technical Reference | League Racing Guide | Skin Tutorial | Autocross Editor | LFS Editor Guides | Hosting | File Formats | LFS Programming | Movie Tutorial | Scripting