View source for LFS Editor/Guides/Driver Side Swap

=== Driver Side Swap ===

{{steps
| Open the model you will edit
| Click the {{old button|Edit|#a1a1ff}} button in the bottom right
| Click the {{old button|tri}} button at the top to enter, or pressing the {{key press|2}} key. [[LFS Editor/Triangle Mode|Triangle Mode]].
| [[File:LFS Editor Modeller view modes.jpg]] from the view models section at the bottom right Click the {{old button|l.r.swap|#a1a1ff}}
| Select the triangles you want to switch sides and click the {{old button|swap|#eba4a4}} button. After clicking on l.r.swap, this section will be on the top right [[File:L.r.swap.png]]
| The triangles you selected will look like this ➔ {{old button|  |#b81414}}.       [[File:Cocpit Swap side.jpg|thumb|PEJO 310 COCPIT swaping]]
| After you finish the triangles Click the  pressing the {{key press|esc}} key. [[LFS Editor/Vehicle Editor/Class & Inputs]].
| From the bottom left click {{old button|locked drive side|#f0e68c}} and confirm.
| [[File:Select side.jpg]] and when you press the direction buttons, you will notice that the driver's side and the triangles you selected change.
}}